(815) 344-8186 - Local Illinois Service - FREE Estimates!

A Well Water Softener is designed for water quality that would crush a standard Water Softener.

In many cases, we use Iron Filters to solve nasty well water problems. But water conditions like Tannins and low to moderate pH can make Iron Filters less effective.
The Pro Series HB is a custom High Backwash Well Water Softener made for high levels of Iron and Manganese.

This exclusive Garrelts Water Softener combines 3 patented technologies, commercial quality components, and special installation methods.

This is not your ordinary residential water softener.

This water softener is designed to last 20 years or more!

High Flow Softener Benefits

  • High flow softener valve protects water pressure
  • Successfully used on Iron levels over 20ppm
  • Commercial-grade valve for unmatched reliability
  • Custom controller software for precise adjustment
Product Overall rating: ☆☆☆☆☆ 0 based on 0 reviews
5 1
Share your product review!

high backwash water softener

High Backwash Softener Technology

The Backwash cycle during regeneration is critical for high Iron water. If a softener isn’t completely flushed out, Iron will stay behind. The system gets damaged. The water gets rusty. Not good!

There must be room inside the Water Softener for resin to expand. Water needs to “scour” the inside of the system clean.

The Pro Series HB systems use 33% larger tanks with special “plate distributors”. These plates have 56% more surface area than a standard softener “cone distributor”. The combination allows us to flush 3-4x more vigorously than a conventional softeners.

You get optimal Iron removal not possible with a “standard softener”.

Softener Valve

Commercial Quality + Reliability

The Pro Series HB uses a simple, rugged design with only 41 parts. We’ve eliminated the parts that plug up with Iron, or jam in normal softeners. No screens, springs, micro switches – not even 1 screw!

Private wells usually have lower water pressure than city water. Most softeners make it even worse. This valve is 66% less restrictive than standard water softeners. It has a full 1.25” flow. You get maximum performance that won’t restrict your home’s plumbing system.

water softener resin

Consistent Iron Removal, Longer Life

Water Softener Resin is the heart of a system. Standard Resin breaks down 2-10% every year. Iron can easily plug up resin. Capacity goes down, and rust stains begin.

The Pro Series HB uses a different resin structure that is 25% stronger than average. The enhanced resin structure has more “links in the chain”. We combine stronger resin with a special resin cleaner for 33% longer service life.

Well Water Softener Specifications

Specification HB-24 HB-32 HB-48 HB-64
Capacity 24,230 grains 32,310 grains 48,460 grains 64,620 grains
Resin Tank Size 9″ x 48″ 10″ x 54″ 13″ x 54″ 14″ x 65″
Resin Cu. Ft. 0.75ft3 1.0ft3 1.5ft3 2.0ft3
Resin Type 10% Crosslink 10% Crosslink 10% Crosslink 10% Crosslink
Distributor 9″ plate 10″ plate 13″ plate 14″ plate
Flow Rate 31gpm 28gpm 34gpm 33gpm
Inlet/Outlet 1.25″ 1.25″ 1.25″ 1.25″
Electrical 12V 12V 12V 12V

FREE Quote!

Find the right solution for your water problems!

High Flow Water Softener Reviews

Name
Email
Review Title
Rating
Review Content
Share This